How to prevent the degradation of cutting performance of fiber laser cutter?

Release Time:2022-10-20

Read:

With the development of laser cutting technology, fiber laser cutting machine is extensively used, and in the process of use, we will also find some problems, similar as decelerating down the slice speed, cutting delicacy,etc., may be because the fiber laser cutting machine in the long- term use of the process caused by loss, which affects the slice performance, the following we dissect the reasons for the decline in cutting performance of fiber laser cutting machine.

1. power after a long period of use of the machine, the laser power will more or less decline, which will directly affect the performance of laser cutting machine slice.
2. distance the distance between the processing workpiece and the snoot also affects the cutting effect of the laser cutting machine, so to acclimate the applicable distance, doesn't affect the performance of slice;.
3. position the position of the focal point directly affects the slice progress, the periphery of the focal spot should be as small as possible, which in turn produces a narrow tear, if the slice performance decreases, conforming the position of the focal point is a good system.
4. prolonged load, failure to maintain and indecorous operation of the driver are the reasons for the decline in the performance of cutting outfit.
In summary, we find the reasons for the decline in the performance of laser cutting machine, also we can define the right drug, take preventative measures to effectively avoid or decelerate down the decline in cutting performance in a timely manner.

generally pay attention to the conservation of the machine. Fiber laser cutting machine for a long time processing, will beget wear and tear and gash of corridor, which will inescapably affect the performance of the machine slice, also the diurnal conservation is veritably important, according to the product company's diurnal conservation table for diurnal conservation.

The operation of the machine standardization. Now the larger fiber laser cutting machine manufacturers will allow customers to arrange for special training, training machine operating procedures, training and qualified before arranging for induction operations, dedicated operation is not only conducive to the normal work of fiber laser cutting machine, to effectively avoid safety accidents.

Baiwei Laser reminds all friends: as the weather gets colder, the laser must be added to the special laser antifreeze, if the addition of ethanol to the structure of the corrosion of the laser, cutting head, fiber icing, not covered by the warranty, bear in mind!

Last One: What does a laser cutting machine do?

Next Article: What is the cost of a laser cutting machine?