A.According to your own requirement；
You need to choose the most suitable machine according to your own requirements; You need to consider according to the materials you cut, the dimension of your work table size; most importantly leave space for your future use;
B.According to your own budget- cost effective and economic machine
The price of fiber laser cutting machine is relatively higher compared to traditional processing equipment, that’s why many customers has hesitant. But laser technology is a more mature and advanced technology. It improves cutting quality, speed and efficiency of processing and reduce processing costs and save labor cost. In conclusion, it’s a worthwhile investment.

The most widely used auxiliary gases that can be used by fiber laser cutting machine are mainly air, nitrogen, oxygen and argon. Now I will show you how to use them in different materials.
A.Air
Air can be supplied directly by air compressor. So it’s much cheaper compared to other gases. Although air contains about 20% oxygen, but it’s cutting efficiency is far less than oxygen. Air cutting capacity is similar to nitrogen.
It’s widely used for carbon steel, stainless steel, aluminum, aluminum alloy, copper, brass etc. But if you have high requirements for cutting quality, we do not suggest use air to cut stainless steel, copper, brass, aluminum, aluminum alloy etc cause the air will oxidize the base metal.
B.Nitrogen
It’s widely used in stainless steel, copper, brass, aluminum, aluminum alloy,galvanized sheet etc.
C.Oxygen
It’s widely used in carbon steel etc
3.Argon
The cost of argon is much expensive, it’s widely used for Titanium, Titanium Alloy.

a.The laser source is the core part of fiber laser cutting machine, the cost of the laser source is expensive; For a second hand fiber laser cutting machine, the using life of laser source is reduced, so it will reduce the cutting efficiency. In future,you will spend more money to purchase a new laser source;
b.The function of CNC machine tools are updated quickly, while the function of second-hand equipment are backward, which is not conducive to the fine processing in future.
c.With bad after-sale service support, it’s hardly to get the service from the original factory when you need support;
d.Incomplete accessories will affect the cutting progress and increase the using cost.

A.The cooling system should be grounded, and the water tank and waterway should be cleaned frequently;
B.The laser tube installation fulcrum of the laser cutting machine should be reasonable, and the fulcrum should be at 1/4 of the total length of the laser tube, otherwise the laser tube spot pattern will be deteriorated, and some spots will become several points after a period of work, resulting in the reduction of laser power. , resulting in constant tube replacement;
C.Water protection should be checked frequently for cleaning;
D.The air suction device should be checked and cleaned regularly, and the fan air duct should be cleaned up. Otherwise, a lot of smoke and dust cannot be discharged, which will contaminate the lens and the laser tube, and cause the mechanical and electronic components to easily oxidize and cause poor contact;
E.Inspection focus mirror and reflector mirror;
F.The working environment of fiber laser cutting machine should not be too harsh. If the ambient temperature is higher than 30 degrees and lower than 18 degrees, there is too much dust and severe air pollution, so that the machine is severely damaged and the failure rate continues to rise; Electrical accessories often fail in humid environments.

The fiber laser cutting machine uses high-quality laser source from China and imported international advanced laser source to output high-energy density laser beams, and focus on the surface of the work-piece, so the area irradiated by the ultra-fine focus spot on the work-piece is instantly melted and vaporized. The numerical control mechanical system moves the spot irradiation position to realize automatic cutting. Fiber laser cutting machine is a high-tech equipment integrating advanced fiber laser technology, numerical control technology and precision mechanical technology.

A.When the power is on or the machine is running, please do not touch any electrical components in the electrical cabinet and the console. Otherwise, electric shock may occur;
B.Please do not operate any switch knob with wet hands to prevent electric shock;
C.Please do not check wires or replace electrical components with power on, otherwise you will get electric shock or injury;
D.Maintenance personnel with corresponding technical qualifications can only maintain the equipment in strict accordance with the technical requirements of electrical maintenance to prevent accidents.

A.Machine table weight and precision;
B.The purity of gas;
C.The quality of metal sheet;
D.Cutting parameters;
E.Engineer’s experience;
F.The complicated of the drawings;
G.Temperature of machine working.

There are hundreds of fiber laser cutting machine suppliers in this market.So it’s very easily to get different price. But as buyer,quality is top priority.
Baiwei Laser has over 18 years history focused on this industry since 2004. We special has a complete production line to process our machine table so we can make sure each step is under strict quality control. Most importantly, we use over 10 sets of CNC high value and high precision equipment to process our machine table and cast aluminum beam. So we can make sure the original precision of our machine table is 0.01mm. With a high quality machine table, we can solve your worry from the source.
Till now, we have two industrial park in the middle of China, in Henan province, one factory in Guangzhou and one factory in Suzhou. So our quality is mature in this market.