What is the cost of a laser cutting machine for carbon steel?

Model:BWQG6016-6000*160 professional tube laser cutting machine
Power:3kw/4kw/6kw/8kw
Cutting diameter: ¡Ü499mm
Cutting length: 6000mm/9000mm/12000mm

Model:BW-G6025
Laser Power:500w/1kw/2kw/4kw/6kw/8kw/10kw/12kw
Max.cutting Speed:35-80m/min
Positioning accuracy:0.03mm
Re-position accuracy:0.02mm
Min.line Width:0.1mm

Model:BWQG6016-6000*160 professional tube laser cutting machine
Power:3kw/4kw/6kw/8kw
Cutting diameter: ≤499mm
Cutting length: 6000mm/9000mm/12000mm

Model: BW-G3015
Cutting range: 3000x1500mm (Optional)
Laser power: 1kw/2kw/3kw/4kw/6kw/8kw/10kw/12kw/15kw/20kw/30kw (Optional)
Max moving speed: 100m/min
Max cutting speed: 35-80m/min
Positioning accuracy: 0.03mm
Repositioning accuracy: 0.02mm
Min line width: 0.1mm

Parameter
Model BW3000/BW6000/BW9000
Laser Generator Medium Fiber Laser Source
Output Power 3000W/4000W/6000W/8000W/12000W
Effective pipe cutting diameter 15-220mm
Working axial positioning accuracy ＜±0.05mm
Worktable reposition accuracy ＜±0.02mm

Model:BW-G3015
Cutting Range:1500*3000mm
Laser Power:500w/1kw/2kw/4kw/6kw/8kw/10kw/12kw
Max.moving Speed:100m/min
Max.cutting Speed:35-80m/min
Positioning accuracy:0.03mm
Re-position accuracy:0.02mm
Min.line Width:0.1mm

Model:BW-8025
cutting range:2.5*8m
Power:8kw
Max cutting speed:60m/min
Max idle speed£º120m/min
positioning accuracy£º0.03mm
Repeatability£º0.02mm

Model:BW3000/BW6000
Laser Type:Fiber Laser Source
Max. Output Power:500W/800W/1000W/1500W/2000W
Effective Pipe Cutting Diameter:¡Ü499MM
Effective Pipe Cutting Length:3000MM/6000MM
Workable Axis Positioning Accuracy:¡Ü¡À0.05MM
Cutting thickness£¨Under the condition of the cutting condition£ Carbon steel 0.5-14mm
Stainless steel 0.5-8mm

The fiber laser cutting machine is a laser cutting machine with a fiber laser generator as the light source. It outputs a high-energy-density laser beam through a fiber laser and gathers it on the surface of the workpiece to instantly melt and vaporize the area irradiated by the ultra-fine focal spot on the workpiece. Automatic cutting is realized by moving the spot irradiation position by the numerical control mechanical system. Fiber laser cutting machine can be used for flat cutting or bevel cutting with neat and smooth edges. Suitable for high-precision cutting of metal plates, etc. At the same time, it can replace the original imported five mechanical arms for 3D cutting axis laser. Compared with large-volume gas lasers and solid-state lasers, it has obvious advantages and has gradually developed into an important candidate for high-precision laser processing, lidar systems, space technology, laser medicine and other fields. At present, it has developed into one of the world’s leading technology products.

Model:BW-10025
cutting range:length:6-13.5m, width:2.5-3.2m
Power:8kw
Max cutting speed:60m/min
Max idle speed：120m/min
positioning accuracy：0.03mm
Repeatability：0.02mm

Model:BW-G6025
Laser Power:500w/1kw/2kw/4kw/6kw/8kw/10kw/12kw
Max.cutting Speed:35-80m/min
Positioning accuracy:0.03mm
Re-position accuracy:0.02mm
Min.line Width:0.1mm

The ultra-large-format laser cutting machine has a large working format and can cut large and thick plates. The power section can be selected from 8000W-20000W, and it can process large-sized steel and a wide range of processing materials. It can be matched with high power, the thickness of the processing plate is large, the ultra-large format size can be selected, and the processing plate size is large. Flexible operation control system, humanized design, only for better cutting experience for users.
In the production process of hardware accessories, fiber laser cutting machine is needed, which has high cutting quality and fast speed.Model:BW-G12025
Laser Power:500w/1kw/2kw/4kw/6kw/8kw/10kw/12kw
Max.cutting Speed:35-80m/min
Positioning accuracy:0.03mm
Re-position accuracy:0.02mm
Min.line Width:0.1mm

Model:BWQG6016-6000*160 professional tube laser cutting machine
Power:3kw/4kw/6kw/8kw
Cutting diameter: ≤499mm
Cutting length: 6000mm/9000mm/12000mm

Model:BWQG6016-6000*160 professional tube laser cutting machine
Power:3kw/4kw/6kw/8kw
Cutting diameter: ≤499mm
Cutting length: 6000mm/9000mm/12000mm

Zhengzhou Baiwei company adopts the original imported Renishaw laser interferometer from Switzerland, which is worth 30,000 US dollars. Test the linear accuracy of the machine tool guide rail after assembly, and perform precise compensation at the same time to reduce the accuracy error.
In the production process of hardware accessories, fiber laser cutting machine is needed, which has high cutting quality and fast speed.Model:BW-G4020
Laser Power:500w/1kw/2kw/4kw/6kw/8kw/10kw/12kw
Max.cutting Speed:35-80m/min
Positioning accuracy:0.03mm
Re-position accuracy:0.02mm
Min.line Width:0.1mm

For large machine bed we have many years of experience in processing, each machine bed will be placed 30 to 45 days after rough machining natural failure, the internal stress release completely again after finishing, ensure the machining accuracy. High strength, stability, ensuring 10 years of use without distortion.
Cutting range: 3000x1500mm (Optional)
Laser power: 1kw/2kw/3kw/4kw/6kw/8kw/10kw/12kw/15kw/20kw/30kw (Optional)
Max moving speed: 100m/min
Max cutting speed: 35-80m/min
Positioning accuracy: 0.03mm
Repositioning accuracy: 0.02mm
Min line width: 0.1mm

Model: BW-G6025
Cutting range: 6000x2500mm (Optional)
Laser power: 1kw/2kw/3kw/4kw/6kw/8kw/10kw/12kw/15kw/20kw/30kw (Optional)
Max moving speed: 120m/min
Max cutting speed: 35-80m/min
Positioning accuracy: 0.03mm
Repositioning accuracy: 0.02mm
Min line width: 0.1mm

The closed fiber laser cutting machine has good cutting quality and adopts non-contact cutting. Therefore, the cutting edge of the closed fiber laser cutting machine is little affected by heat, and there is basically no thermal deformation of the workpiece.
Laser Source:IPG/Raycus/Nlight
Laser Power:6kw/8kw/10kw/12kw/15kw/20kw (Optional)
Processing Surface:6000*2500mm/6000*2000mm/4000*2000mm (Optional)
Position Accuracy X, Y and Z Axle:¡À0.03MM
Cutting Thickness:Carbon Steel 0.5MM-30MM, Stainless Steel 0.5MM-16MM

Adopting gantry dual drive structure, high precision gear, gear reducer drive and linear guide rail, drive smoothly, high speed, high accuracy.
Cutting range: 3000x1500mm (Optional)
Laser power: 1kw/2kw/3kw/4kw/6kw/8kw/10kw/12kw/15kw/20kw/30kw (Optional)
Max moving speed: 100m/min
Max cutting speed: 35-80m/min
Positioning accuracy: 0.03mm
Repositioning accuracy: 0.02mm
Min line width: 0.1mm

Model:BW-G6025
Laser Power:6kw/8kw/10kw/12kw
Max.moving Speed:100m/min
Max.cutting Speed:35-80m/min
Positioning accuracy:0.03mm
Re-position accuracy:0.02mm
Min.line Width:0.1mm

Model:BW300
Laser Generator Medium:Fiber Laser Source
Output Power:1kw /2Kw/3kw/4kw
Effective pipe cutting diameter:15-220mm
Workable axial positioning accuracy:<±0.05mm Workable reposition accuracy:<±0.02mm

Model: BW-G12025
Cutting range: 12000x2500mm (Optional)
Laser power: 1kw/2kw/3kw/4kw/6kw/8kw/10kw/12kw/15kw/20kw/30kw (Optional)
Max moving speed: 100m/min
Max cutting speed: 35-80m/min
Positioning accuracy: 0.03mm
Repositioning accuracy: 0.02mm
Min line width: 0.1mm

Model:BW-8025
cutting range:2.5*8m
Power:8kw
Max cutting speed:60m/min
Max idle speed£º120m/min
positioning accuracy£º0.03mm
Repeatability£º0.02mm

Model: BW-G6025
Cutting range: 6000x2500mm (Optional)
Laser power: 1kw/2kw/3kw/4kw/6kw/8kw/10kw/12kw/15kw/20kw/30kw (Optional)
Max moving speed: 120m/min
Max cutting speed: 35-80m/min
Positioning accuracy: 0.03mm
Repositioning accuracy: 0.02mm
Min line width: 0.1mm

Model:BWQG6016-6000*160 professional tube laser cutting machine
Power:3kw/4kw/6kw/8kw
Cutting diameter: ≤499mm
Cutting length: 6000mm/9000mm/12000mm

Model: BW-G3015
Cutting range: 3000x1500mm (Optional)
Laser power: 1kw/2kw/3kw/4kw/6kw/8kw/10kw/12kw/15kw/20kw/30kw (Optional)
Max moving speed: 100m/min
Max cutting speed: 35-80m/min
Positioning accuracy: 0.03mm
Repositioning accuracy: 0.02mm
Min line width: 0.1mm

Parameter
Model BW3000/BW6000/BW9000
Laser Generator Medium Fiber Laser Source
Output Power 3000W/4000W/6000W/8000W/12000W
Effective pipe cutting diameter 15-220mm
Working axial positioning accuracy ＜±0.05mm
Worktable reposition accuracy ＜±0.02mm

The laser cutting machine has the characteristics of intelligence and can complete the processing of various complex structures.Model:BW-G12025
Cutting Range:2500mm*12000mm
Laser Power:500w/1kw/2kw/4kw/6kw/8kw/10kw/12kw
Max.moving Speed:100m/min
Max.cutting Speed:35-80m/min
Positioning accuracy:0.03mm
Re-position accuracy:0.02mm
Min.line Width:0.1mm

Application industry:
Laser pipe cutting machine is used in rail transit, automobile, construction machinery, agriculture and forestry machinery, electrical appliance manufacturing, elevator manufacturing, household appliances, food machinery, textile machinery, tool processing, petroleum machinery, food machinery, kitchen and bathroom, decorative advertising, laser processing Services and other machinery manufacturing and processing industry.

Model:BW-6025
Cutting range: Length:6m-13.5m
Cutting range: Width:2.5m-3.2m
Power:8kw
maximum emptiness speed: 120m/min
maximum cutting speed:60m/min
positioning accuracy:0.03mm
Repeatability:0.03mm

Model:BW-G8025
Laser Power:500w/1kw/2kw/3KW/4kw/6kw/8kw/10kw
Max.cutting Speed:60m/min
Positioning accuracy:0.03mm
Re-position accuracy:0.02mm
Min.line Width:0.1mm

Model: BW-G3015
Cutting range: 3000x1500mm (Optional)
Laser power: 1kw/2kw/3kw/4kw/6kw/8kw/10kw/12kw/15kw/20kw/30kw (Optional)
Max moving speed: 100m/min
Max cutting speed: 35-80m/min
Positioning accuracy: 0.03mm
Repositioning accuracy: 0.02mm
Min line width: 0.1mm