high speed open type fiber laser cutting machine for metal sheet cutting

Model:BWQG6016-6000*160 professional tube laser cutting machine
Power:3kw/4kw/6kw/8kw
Cutting diameter: ¡Ü499mm
Cutting length: 6000mm/9000mm/12000mm

Model:BW3000/BW6000
Laser Type:Fiber Laser Source
Max. Output Power:500W/800W/1000W/1500W/2000W
Effective Pipe Cutting Diameter:≤220MM
Effective Pipe Cutting Length:3000MM/6000MM
Workable Axis Positioning Accuracy:≤±0.05MM

Model:BW-8025
cutting range:2.5*8m
Power:8kw
Max cutting speed:60m/min
Max idle speed：120m/min
positioning accuracy：0.03mm
Repeatability：0.02mm

Model: BW-G6025
Cutting range: 6000x2500mm (Optional)
Laser power: 1kw/2kw/3kw/4kw/6kw/8kw/10kw/12kw/15kw/20kw/30kw (Optional)
Max moving speed: 120m/min
Max cutting speed: 35-80m/min
Positioning accuracy: 0.03mm
Repositioning accuracy: 0.02mm
Min line width: 0.1mm

The fiber laser cutting machine is a laser cutting machine with a fiber laser generator as the light source. It outputs a high-energy-density laser beam through a fiber laser and gathers it on the surface of the workpiece to instantly melt and vaporize the area irradiated by the ultra-fine focal spot on the workpiece. Automatic cutting is realized by moving the spot irradiation position by the numerical control mechanical system. Fiber laser cutting machine can be used for flat cutting or bevel cutting with neat and smooth edges. Suitable for high-precision cutting of metal plates, etc. At the same time, it can replace the original imported five mechanical arms for 3D cutting axis laser. Compared with large-volume gas lasers and solid-state lasers, it has obvious advantages and has gradually developed into an important candidate for high-precision laser processing, lidar systems, space technology, laser medicine and other fields. At present, it has developed into one of the world’s leading technology products.

The overall bed of the enclosed fiber laser cutting machine has good rigidity, and the guide rails of the enclosed fiber laser cutting machine are fully enclosed for protection without dust pollution.
Laser Source:IPG/Raycus/Nlight
Laser Power:6kw/8kw/10kw/12kw/15kw/20kw (Optional)
Processing Surface:6000*2500mm/6000*2000mm/4000*2000mm (Optional)
Position Accuracy X, Y and Z Axle:¡À0.03MM
Cutting Thickness:Carbon Steel 0.5MM-30MM, Stainless Steel 0.5MM-16MM

Name: Metal Sheet and Tube combined Laser Cutting Machine
Laser output power: 6000W/4000W/3000W/2000W/1000W
Cutting plate width: 3000mm*15000mm (length of 3 meters /6 meters)
Positioning accuracy: 0.02mm
Applicable materials: carbon steel (20mm), stainless steel (10mm), aluminum (6mm)

CNC fiber laser cutting machine for sheet metal and tube. Take 2000w as example, maximum cutting sheet metal of mild steel 16mm, stainless steel 8mm, aluminum 6mm, brass 3mm, pipe / tube processing, L3000mm or 6000mm, Φ20-300mm.

Model:BW-G3015
cutting range:2.5*3m
Power:3kw
Max cutting speed:60m/min
Max idle speed£º120m/min
positioning accuracy£º0.03mm
Repeatability£º0.02mm

Parameter
Models BW-G3015 BW-G4015 BW-G4020 BW-G6015 BW-G6020 Optional
Cutting range 3000x1500mm 4000x1500mm 4000x2000mm 6000x1500mm 6000x2000mm Optional
Laser power 1kw/2kw/3kw/4kw/6kw/8kw/10kw/12kw/15kw/20kw/30kw
Max moving speed 100m/min
Max cutting speed 35-80m/min
Positioning accuracy 0.03mm
Repositioning accuracy 0.02mm
Min line width 0.1mm

Model: BW-G3015
Cutting range: 3000x1500mm (Optional)
Laser power: 1kw/2kw/3kw/4kw/6kw/8kw/10kw/12kw/15kw/20kw/30kw (Optional)
Max moving speed: 100m/min
Max cutting speed: 35-80m/min
Positioning accuracy: 0.03mm
Repositioning accuracy: 0.02mm
Min line width: 0.1mm

Model: BW-G6025
Cutting range: 6000x2500mm (Optional)
Laser power: 1kw/2kw/3kw/4kw/6kw/8kw/10kw/12kw/15kw/20kw/30kw (Optional)
Max moving speed: 120m/min
Max cutting speed: 35-80m/min
Positioning accuracy: 0.03mm
Repositioning accuracy: 0.02mm
Min line width: 0.1mm

Model:BW-8025
cutting range:2.5*8m
Power:8kw
Max cutting speed:60m/min
Max idle speed£º120m/min
positioning accuracy£º0.03mm
Repeatability£º0.02mm

Model: BW-G6025
Cutting range: 6000x2500mm (Optional)
Laser power: 1kw/2kw/3kw/4kw/6kw/8kw/10kw/12kw/15kw/20kw/30kw (Optional)
Max moving speed: 120m/min
Max cutting speed: 35-80m/min
Positioning accuracy: 0.03mm
Repositioning accuracy: 0.02mm
Min line width: 0.1mm

The whole set of the closed type fiber laser cutting machine is equipped with a dedicated laser cutting control system and an auto-following focus system.The closed type fiber laser cutting machine can automatically adjust the focus according to the bending and fluctuation of the workpiece in real time to ensure cutting quality and precision.
Laser power:1kw/2kw/3kw/4kw/6kw/8kw/10kw/12kw/15kw/20kw/30kw
Max moving:speed 100m/min
Max cutting:speed 35-80m/min
Positioning:accuracy 0.03mm
Repositioning accuracy:0.02mm
Min line width:0.1mm

Model: BW-G6025
Cutting range: 6000x2500mm (Optional)
Laser power: 1kw/2kw/3kw/4kw/6kw/8kw/10kw/12kw/15kw/20kw/30kw (Optional)
Max moving speed: 120m/min
Max cutting speed: 35-80m/min
Positioning accuracy: 0.03mm
Repositioning accuracy: 0.02mm
Min line width: 0.1mm

The enclosed fiber laser cutting machine adopts an automatic exchange table, and the equipment can be loaded and unloaded while processing, which is convenient, fast and time-saving.
Model: BW-G6025
Cutting range: 6000x2500mm (Optional)
Laser power: 1kw/2kw/3kw/4kw/6kw/8kw/10kw/12kw/15kw/20kw/30kw (Optional)
Max moving speed: 120m/min
Max cutting speed: 35-80m/min
Positioning accuracy: 0.03mm
Repositioning accuracy: 0.02mm
Min line width: 0.1mm

Model: BW-G6025
Cutting range: 6000x2500mm (Optional)
Laser power: 1kw/2kw/3kw/4kw/6kw/8kw/10kw/12kw/15kw/20kw/30kw (Optional)
Max moving speed: 120m/min
Max cutting speed: 35-80m/min
Positioning accuracy: 0.03mm
Repositioning accuracy: 0.02mm
Min line width: 0.1mm

Baiwei’s closed fiber laser cutting machine adopts the world’s top imported fiber laser with stable performance. In addition, Baiwei’s key components have a service life of up to 100,000 hours, with extremely low cost of use.
Laser Power:6kw/8kw/10kw/12kw/15kw/20kw (Optional)
Processing Surface:6000*2500mm/6000*2000mm/4000*2000mm (Optional)
Position Accuracy X, Y and Z Axle:¡À0.03MM
Cutting Thickness:Carbon Steel 0.5MM-30MM, Stainless Steel 0.5MM-16MM

Model: BW-G3015
Cutting range: 3000x1500mm (Optional)
Laser power: 1kw/2kw/3kw/4kw/6kw/8kw/10kw/12kw/15kw/20kw/30kw (Optional)
Max moving speed: 100m/min
Max cutting speed: 35-80m/min
Positioning accuracy: 0.03mm
Repositioning accuracy: 0.02mm
Min line width: 0.1mm

Parameter
Models BW-G3015 BW-G4015 BW-G4020 BW-G6015 BW-G6020 Optional
Cutting range 3000x1500mm 4000x1500mm 4000x2000mm 6000x1500mm 6000x2000mm Optional
Laser power 1kw/2kw/3kw/4kw/6kw/8kw/10kw/12kw/15kw/20kw/30kw
Max moving speed 100m/min
Max cutting speed 35-80m/min
Positioning accuracy 0.03mm
Repositioning accuracy 0.02mm
Min line width 0.1mm

Performance characteristics:1.Dual servo-motor drive;2.With higher stability,higher speed and faster acceleration;3.Full digital CNC servo motor communicationThe new peripheral design,which can enter the equipment working area from three different directions;

4.The equipment is operate with or without a switchboard.
Optical Fiber Laser Cutting Machine:1.High photoelectric conversion rate;2.Low energy consumption, fast speed and high accuracy; Mainly focus on all kinds of metal materials processing;3.Optical fiber laser cutter has obvious advantages in medium and thin plate cutting.

Zhengzhou Baiwei company adopts the original imported Renishaw laser interferometer from Switzerland, which is worth 30,000 US dollars. Test the linear accuracy of the machine tool guide rail after assembly, and perform precise compensation at the same time to reduce the accuracy error.
In the production process of hardware accessories, fiber laser cutting machine is needed, which has high cutting quality and fast speed.Model:BW-G4020
Laser Power:500w/1kw/2kw/4kw/6kw/8kw/10kw/12kw
Max.cutting Speed:35-80m/min
Positioning accuracy:0.03mm
Re-position accuracy:0.02mm
Min.line Width:0.1mm

Using the special control system of optical fiber laser, all digital CNC servo motor communication, humanized design, operation is faster.
Cutting range: 3000x1500mm (Optional)
Laser power: 1kw/2kw/3kw/4kw/6kw/8kw/10kw/12kw/15kw/20kw/30kw (Optional)
Max moving speed: 100m/min
Max cutting speed: 35-80m/min
Positioning accuracy: 0.03mm
Repositioning accuracy: 0.02mm
Min line width: 0.1mm

After years of development of Fiber laser cutting machines for various industries to improve the production efficiency of processing production, the application in various industries is becoming more widespread.
Fiber laser cutting machines use laser technology for processing and production, which is non-contact processing. Compared with traditional methods, they do not cause deformation and damage to the material, and the processing is fine and fast.
Name: Enclosed fiber laser machine
Model: BW-G6025-8kw
Power: 8000W
Laser source: Raycus / IPG / nLIGHT
Cutting Head: Precitec
Control system: Cypcut (China)
Servo motor : Panasonic / YASKAWA (Japan)
Reducer: Neugart / Shimpo
Gear and rack: APEX / YYC (Taiwan,China)
Guide rail : PMI / HIWIN (Taiwan,China)
Warranty time THREE YEARS
Working Area: 6000*2500mm
Cutting Thickness Max 30mm MS, Max 20mm SS,

In many areas of the cutting process, laser cutters are the most efficient on the modern market – higher photoelectric conversion efficiency, more efficient beam delivery, resulting in better finished products and less energy waste.
Cutting range: 3000x1500mm (Optional)
Laser power: 1kw/2kw/3kw/4kw/6kw/8kw/10kw/12kw/15kw/20kw/30kw (Optional)
Max moving speed: 100m/min
Max cutting speed: 35-80m/min
Positioning accuracy: 0.03mm
Repositioning accuracy: 0.02mm
Min line width: 0.1mm

Model:BW-G3015
cutting range:2.5*3m
Power:3kw
Max cutting speed:60m/min
Max idle speed£º120m/min
positioning accuracy£º0.03mm
Repeatability£º0.02mm

Model: BW-G3015
Cutting range: 3000x1500mm (Optional)
Laser power: 1kw/2kw/3kw/4kw/6kw/8kw/10kw/12kw/15kw/20kw/30kw (Optional)
Max moving speed: 100m/min
Max cutting speed: 35-80m/min
Positioning accuracy: 0.03mm
Repositioning accuracy: 0.02mm
Min line width: 0.1mm

Model:BWQG6016-6000*160 professional tube laser cutting machine
Power:3kw/4kw/6kw/8kw
Cutting diameter: ≤499mm
Cutting length: 6000mm/9000mm/12000mm

Baiwei fiber laser cutting machine is a high-tech laser cutting machine integrating laser cutting, precision machinery, motion control technology and other disciplines. Model: BW-G4015
Cutting range: 4000x1500mm (Optional)
Laser power: 1kw/2kw/3kw/4kw/6kw/8kw/10kw/12kw/15kw/20kw/30kw (Optional)
Max moving speed: 100m/min
Max cutting speed: 35-80m/min
Positioning accuracy: 0.03mm
Repositioning accuracy: 0.02mm
Min line width: 0.1mm

CNC fiber laser cutting machine is famous by its high cutting speed and high cutting precision, and it becomes the most popular cutting machine in the metal sheet process industry. It has main advantages as below.
1. Electro-optical conversion efficiency up to 30%.
2. Very good pulse power, energy stability.
3. Long life, high precision, pump source life more than 100,000 hours.
4. Faster cutting speed and perfect cutting effect.
5. Beam quality optimized for application.
6. Compact structure design.
7. Low-cost and compact solution, using semiconductor fiber as laser generating medium, no laser generating gas, green and environmental protection.
8. Small size, light weight, maintenance free.

Model:BW-G6025
Cutting Range:2500mm*6000mm
Laser Power:6kw/8kw/10kw/12kw
Max.moving Speed:100m/min
Max.cutting Speed:35-80m/min
Positioning accuracy:0.03mm
Re-position accuracy:0.02mm
Min.line Width:0.1mm